ESDAULC6-1U2 Datasheet, PDF (5/10 Pages) STMicroelectronics – Single-line unidirectional ESD protection for high speed interface

ESDAULC6-1U2
3
Package information
Package information
● Epoxy meets UL94, V0
● Lead-free packages
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK^® packages, depending on their level of environmental compliance. ECOPACK^®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK^® is an ST trademark.
Table 3. ST0201 dimensions
D
E
Top
A
Side
b1
b2
L1
L2
Bottom
Pin 1 _b1 ^e _b2
L1
L2
Bottom
e
Pin 1 available in different forms
Dimensions
Ref Millimeters
Inches
Min. Typ. Max. Min. Typ. Max.
A 0.23 0.28 0.33 0.009 0.011 0.013
b1 0.13 0.18 0.23 0.005 0.007 0.009
b2 0.14 0.19 0.24 0.006 0.007 0.009
D 0.55 0.60 0.65 0.022 0.024 0.026
E 0.25 0.30 0.35 0.010 0.012 0.014
e
0.35
0.014
L1 0.20 0.25 0.30 0.008 0.010 0.012
L2 0.20 0.25 0.30 0.008 0.010 0.012
Figure 9. Footprint (dimensions in mm) Figure 10. Marking
1.05
0.425
0.425
Pin1
V1
Pin 2
0.30
Note:
0.20
Product marking may be rotated by multiples of 180° for assembly plant differentiation. In no
case should this product marking be used to orient the component for its placement on a
PCB. Only pin 1 mark is to be used for this purpose.
Doc ID 023270 Rev 1
5/10