CM17699 Datasheet, PDF (5/11 Pages) STMicroelectronics – COLOR PDP DRIVER MODULE

CM17699
4 - PCB MECHANICAL SPECIFICATIONS
The rigid board is 92mm long by 30mm wide.
The rigid board can be mounted on the mechanical
chassis of the plasma panel or on a heat sinker by
clips and/or screws.
The recommended size of the heat sinker depends
Figure 3
92.0mm
3.3mm
on the final application if data drivers are powered
with a DC or an AC supply.
Power supplies (VPP, VSS) are dispatched by large
copper surface in order to spread the current on the
board and reduce voltage drops and EMI.
CN1 & CN2 : JAE IL-3PL-SMTY-E1500
CN3 : JAE IL-FHR-50S-HF-E3000
3 _CN2 1
50
CN3
1
5mm
35.1mm
10.9mm
4mm
3 _CN1
5mm
10.9mm
5 - FPC MECHANICAL SPECIFICATIONS
Figure 4
101.4mm
P 0.3 x (324-1) x 0.9991 = 96.81279 W = 0.15
LCD
Bonding
2.25
0.15
Ø 0.5mm
1.25mm
1.2mm
4.7mm
1.15
1.4
0.4 0.4 0.4
P 0.25961 x (326-1) = 84.37325 W = 0.1
PCB
3.75
Bonding
FPC specifications (UPILEX otherwise thermal expansion specified)
Cu Foil : 35m m
Ni Plating : > 1m m
Au Plating : > 0.1m m
Design values :
Conductor width = 0.15 ± 0.04
Gap width = 0.15 ± 0.04
6 - STV7699 SPECIFICATIONS
6.1 - Features
- 64 outputs plasma display driver
- 170V absolute maximum supply
- 5V supply for logic
- 50/40mA source / sink output
- 60/60mA source / sink output diode
- 64-bit shift register (20MHz)
- BLK, polarity and HIZ control
- BCD technology
6.2 - General Description
The STV7699 is a Plasma Display Panel (PDP) data
driver implemented in ST’s proprietary BCD technol-
ogy. Using a 4-bit wide cascadable shift register,
it drives 64 high current & high voltage outputs.
By serialy connecting several STV7699, any hori-
zontal pixel definition can be performed. The 20MHz
shift clock gives an equivalent 80MHz shift register.
The STV7699 is supplied with a separated 170V
power output supply and a 5V logic supply. All com-
mand inputs are CMOS compatible.
5/11