STM32F103XC Datasheet, PDF (46/118 Pages) STMicroelectronics – Performance line, ARM-based 32-bit MCU with up to 512 KB Flash, USB, CAN, 11 timers, 3 ADCs and 13 communication interfaces

Electrical characteristics
STM32F103xC, STM32F103xD, STM32F103xE
Figure 17. Current consumption in Standby mode versus temperature at different
V_DD values
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
-45
25
70
85
Temperature (°C)
2.4V
2.7V
3.0V
3.3V
3.6V
105
Typical current consumption
The MCU is placed under the following conditions:
● All I/O pins are in input mode with a static value at V_DD or V_SS (no load).
● All peripherals are disabled except if it is explicitly mentioned.
● The Flash access time is adjusted to f_HCLK frequency (0 wait state from 0 to 24 MHz, 1
wait state from 24 to 48 MHZ and 2 wait states above).
● Ambient temperature and V_DD supply voltage conditions summarized in Table 9.
● Prefetch is ON (Reminder: this bit must be set before clock setting and bus prescaling)
When the peripherals are enabled f_PCLK1 = f_HCLK/4, f_PCLK2 = f_HCLK/2, f_ADCCLK = f_PCLK2/4
46/118