STM32F103X4 Datasheet, PDF (32/80 Pages) STMicroelectronics – Low-density performance line, ARM-based 32-bit MCU with 16 or 32 KB Flash, USB, CAN, 6 timers, 2 ADCs, 6 communication interfaces

Electrical characteristics
STM32F103x4, STM32F103x6
Table 11. Embedded reset and power control block characteristics
Symbol
Parameter
Conditions
Min Typ Max Unit
PLS[2:0]=000 (rising edge) 2.1 2.18 2.26 V
PLS[2:0]=000 (falling edge)
2 2.08 2.16 V
PLS[2:0]=001 (rising edge) 2.19 2.28 2.37 V
PLS[2:0]=001 (falling edge) 2.09 2.18 2.27 V
PLS[2:0]=010 (rising edge) 2.28 2.38 2.48 V
PLS[2:0]=010 (falling edge) 2.18 2.28 2.38 V
PLS[2:0]=011 (rising edge) 2.38 2.48 2.58 V
V_PVD
Programmable voltage ^{PLS[2:0]=011 (falling edge) 2.28 2.38 2.48 V}
detector level selection _{PLS[2:0]=100 (rising edge) 2.47 2.58 2.69 V}
PLS[2:0]=100 (falling edge) 2.37 2.48 2.59 V
PLS[2:0]=101 (rising edge) 2.57 2.68 2.79 V
PLS[2:0]=101 (falling edge) 2.47 2.58 2.69 V
PLS[2:0]=110 (rising edge) 2.66 2.78 2.9 V
PLS[2:0]=110 (falling edge) 2.56 2.68 2.8 V
PLS[2:0]=111 (rising edge) 2.76 2.88 3
V
PLS[2:0]=111 (falling edge) 2.66 2.78 2.9 V
V_PVDhyst(2) PVD hysteresis
100
mV
V_POR/PDR
Power on/power down
reset threshold
Falling edge
Rising edge
1.8^{(1) 1.88 1.96 V}
1.84 1.92 2.0 V
V_PDRhyst(2) PDR hysteresis
T_RSTTEMPO(2) Reset temporization
40
mV
1 2.5 4.5 ms
1. The product behavior is guaranteed by design down to the minimum V_POR/PDR value.
2. Guaranteed by design, not tested in production.
32/80
Doc ID 15060 Rev 3