English
Language : 

TS4995 Datasheet, PDF (3/26 Pages) STMicroelectronics – 1.2 W fully differential audio power amplifier with selectable standby and 6 dB fixed gain
TS4995
Absolute maximum ratings and operating conditions
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
Parameter
VCC
Vin
Toper
Tstg
Tj
Rthja
Pdiss
ESD
Supply voltage (1)
Input voltage (2)
Operating free air temperature range
Storage temperature
Maximum junction temperature
Thermal resistance junction to ambient (3)
Power dissipation
MM: machine model (4)
HBM: human body model (5)
Latch-up Latch-up immunity
- Lead temperature (soldering, 10sec)
Value
6
GND to VCC
-40 to + 85
-65 to +150
150
200
Internally limited
200
1.5
200
260
Unit
V
V
°C
°C
°C
°C/W
W
V
kV
mA
°C
1. All voltage values are measured with respect to the ground pin.
2. The magnitude of input signal must never exceed VCC + 0.3 V / GND - 0.3 V.
3. The device is protected in case of over temperature by a thermal shutdown activated at 150° C.
4. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device
with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating.
5. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin
combinations with other pins floating.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
VCC
VSM
VSTBY
TSD
RL
Rthja
Supply voltage
Standby mode voltage input:
Standby Active LOW
Standby Active HIGH
Standby voltage input:
Device ON (VSM=GND) or Device OFF (VSM=VCC)
Device OFF (VSM=GND) or Device ON (VSM=VCC)
Thermal shutdown temperature
Load resistor
Thermal resistance junction to ambient
2.5 to 5.5
VSM=GND
VSM=VCC
1.5 ≤ VSTBY ≤ VCC
GND ≤ VSTBY ≤ 0.4 (1)
150
≥4
100
V
V
V
°C
Ω
°C/W
1. The minimum current consumption (ISTBY) is guaranteed when VSTB Y= GND or VCC (the supply rails) for the whole
temperature range.
3/26