STD45NF75 Datasheet, PDF (3/12 Pages) STMicroelectronics – N-CHANNEL 75V - 0.018 OHM -40A DPAK STripFETTMII POWER MOSFET

STD45NF75
ELECTRICAL CHARACTERISTICS (continued)
SWITCHING ON
Symbol
Parameter
Test Conditions
Min. Typ. Max. Unit
t_d(on)
Turn-on Delay Time
V_DD = 37 V
I_D = 20 A
15
ns
t_r
Rise Time
R_G = 4.7 Ω
V_GS = 10 V
40
ns
(Resistive Load, Figure 3)
Q_g
Total Gate Charge
Q_gs
Gate-Source Charge
Q_gd
Gate-Drain Charge
V_DD=60 V I_D=40A V_GS= 10V
(see test circuit, Figure 4)
60
80
nC
13
nC
23
nC
SWITCHING OFF
Symbol
Parameter
t_d(off)
t_f
Turn-off Delay Time
Fall Time
Test Conditions
Min. Typ. Max. Unit
V_DD = 37 V
I_D = 20 A
55
ns
R_G = 4.7Ω,
V_GS = 10 V
12
ns
(Resistive Load, Figure 3)
SOURCE DRAIN DIODE
Symbol
Parameter
Test Conditions
I_SD
I_SDM ⁽•⁾
Source-drain Current
Source-drain Current (pulsed)
V_SD ^(*) Forward On Voltage
I_SD = 40 A
V_GS = 0
t_rr
Q_rr
I_RRM
Reverse Recovery Time
Reverse Recovery Charge
Reverse Recovery Current
(*)_{Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.}
(_{•)Pulse width limited by safe operating area.}
I_SD = 40 A
di/dt = 100A/µs
V_DD = 30 V
T_j = 150°C
(see test circuit, Figure 5)
Min.
Typ.
120
410
7.5
Max.
40
160
1.5
Unit
A
A
V
ns
nC
A
Safe Operating Area
Thermal Impedance
3/12