AC7MDT10-D32 Datasheet, PDF (2/3 Pages) STMicroelectronics – SDIP32/SO28 Connection Kit for ST7MDT10-EMU3

Figure 4. SO28 application board connection
1. Solder the connection pins to your
application board in place of your MCU. When
soldering, insert the connection pins into the
device adapter, which serves as a support to
ensure correct alignment.
AC7MDT10-D32/S28
2. Plug the SDIP32 adapter
into the W2 connector on the
target emulation board of your
ST7MDT10-EM3.
3. Align pin 1 indicators, then
insert the pins of the SDIP32
adapter into the SDIP32-
SO28 device adapter.
Pin 1
Indicators
Application board
Revision history
Date
14-November-2005
Revision
1
Initial release.
Changes
2/3