AC7MDT10-D32 Datasheet, PDF (1/3 Pages) STMicroelectronics – SDIP32/SO28 Connection Kit for ST7MDT10-EMU3

AC7MDT10-D32/S28
SDIP32/SO28 Connection Kit for ST7MDT10-EMU3
DATA BRIEF
The SDIP32/SO28 Connection Kit (AC7MDT10-
D32/S28) provides the hardware you need to
connect your ST7MDT10-EMU3 emulator to your
application when debugging applications for ST7
microcontrollers in SDIP32 and SO28 packages.
Figure 2. SDIP32 application connection
Connection Kit Contents
■ SDIP32 adapter (DB510) – Allows the
connection of your ST7MDT10-EMU3 emulator
to your application board in place of your ST7.
■ SDIP32-SO28 device adapter (DB359) –
Adapts the SDIP32 adapter to SO28 footprint
of the ST7 on your application board.
2. Plug the SDIP32 adapter
into the W2 connector on the
target emulation board of your
ST7MDT10-EM3.
3. Align pin 1 indicators, then
insert the pins of the SDIP32
adapter into the socket on the
application board.
Pin 1
Indicators
Application board
For more information...
■ ST7-EMU3 User Manual – Information
common to all EMU3 series emulators
■ ST7MDT10-EMU3 Probe User Guide –
Information specific to ST7MDT10-EMU3
1. Solder socket on to the
application board.
Figure 1. SDIP32 adapter
Figure 3. SDIP32 to SO28 device adapter
SDIP32 adapter (DB510)
SDIP32 adapter (DB510)
November 2005
SO28 device adapter
(DB359)
Rev 1
1/3
www.st.com
3