AC7MDT10-D20 Datasheet, PDF (2/3 Pages) STMicroelectronics – DIP20/SO20 Connection Kit for ST7MDT10-EMU3

AC7MDT10-D20/S20
Figure 4. DIP20 adapter, SO20 device adapter and application board connection
DIP20 adapter (DB482A)
DIP20-SO20 device
adapter (DB093)
1. Solder the connection pins to your
application board in place of your MCU. When
soldering, insert the connection pins into the
device adapter, which serves as a support to
ensure correct alignment.
2. Plug the DIP20 adapter into
the W1 connector on the target
emulation board of your
ST7MDT10-EM3.
Pin 1
Indicators
3. Align pin 1 indicators, then
insert the pins of the DIP20
adapter into the DIP20-SO20
device adapter.
Application board
Revision history
Date
14-November-2005
Revision
1
Initial release.
Changes
2/3