AC7MDT10-D20 Datasheet, PDF (1/3 Pages) STMicroelectronics – DIP20/SO20 Connection Kit for ST7MDT10-EMU3

AC7MDT10-D20/S20
DIP20/SO20 Connection Kit for ST7MDT10-EMU3
DATA BRIEF
The DIP20/SO20 Connection Kit (AC7MDT10-
D20/S20) provides the hardware you need to
connect your ST7MDT10-EMU3 emulator to your
application when debugging applications for ST7
microcontrollers in DIP20 and SO20 packages.
Figure 2. DIP20 adapter, DIP20 device adapter
DIP20 adapter (DB482A)
Connection Kit Contents
■ DIP20 adapter (DB482A) – Allows the
connection of your ST7MDT10-EMU3 emulator
to your application board in place of your ST7.
■ DIP20-DIP20 device adapter (DB535) –
Adapts the pin out of the DIP20 adapter to the
DIP20 footprint of the ST7 on your application
board.
■ DIP20-SO20 device adapter (DB093) –
Adapts the DIP20 adapter to SO20 footprint of
the ST7 on your application board.
For more information...
■ ST7-EMU3 User Manual – Information
common to all EMU3 series emulators
■ ST7MDT10-EMU3 Probe User Guide –
Information specific to ST7MDT10-EMU3
Figure 1. DIP20 adapter
DIP20 device adapter
(DB535)
Figure 3. DIP20 application board connection
2. Plug the DIP20 adapter
into the W1 connector on the
target emulation board of your
ST7MDT10-EM3.
3. Align pin 1 indicators, then
insert the pins of the DIP20
adapter into the DIP20-DIP20
device adapter.
4. Align pin 1 indicators, then
insert the pins of the DIP20-
DIP20 device adapter into the
socket on the application
board.
Application board
Pin 1
Indicators
DIP20 adapter (DB586)
1. Solder socket on to the
application board.
Note: The pinout on the DIP20 adapter is askew by 90°
from the microcontroller. You use the DIP20 to
DIP20 device adapter between the flex adapter
and the socket on your application board when
emulating MCUs in DIP20 package.
November 2005
Rev 1
1/3
www.st.com
3