UM0238 Datasheet, PDF (18/20 Pages) STMicroelectronics – STR91x demonstration software

Running the demonstrations
STR91x demonstration software
In order to test the webserver demo you need to:
1. Connect the STR9-EVAL board to your PC Ethernet port using either a crossover
Ethernet cable or through an Ethernet switch or hub.
2. Change your PC IP address to: 192.168.0.x (where x is a value other than 8)
3. Connect to the STR9 webpage by typing http://192.168.0.8 in a browser. The following
page should appear:
Figure 5. STR9 webpage
18/20