TDA7529_11 Datasheet, PDF (18/61 Pages) STMicroelectronics – RF front-end for AM/FM DSP car-radio with IF sampling

Function description
TDA7529
Table 7. I²C addresses
Tuner:
Tuner 3
level at pin AS
2.2V – 3.5V
address:
1100 1xxd
MSB ... LSB
1100 000d
1100 001d
1100 010d
1100 011d
1100 100d
1100 101d
1100 110d
1100 111d
-
-
-
-
-
R/W
W
W
W
Tuner 2
1.1V – 1.7V
1100 x1xd
-
-
-
R/W
W
-
-
W
W
Tuner 1
0.0V – 0.6V
1100 xx1d
-
-
R/W
-
W
-
W
-
W
x
= must be "0" for reading, can be "1" or "0" for writing to the TDA7529
d
= determinates the direction of data transfer, reading or writing
R / W = indicates the address to read to and/or to write from a single TDA7529
W
= indicates those addresses that can be used to transmit equal data to several TDA7529 frontends. A
read out has no purpose for these addresses (data collision), but must be possible without damaging
the tuner IC.
The two serial bus protocols, I²C and SPI, are as follows:
Figure 6. I²C (sub address mode)

STBYTE
NDBYTE





ADDRESS
27
3-
SUBADDRESS.
X
RDBYTE
DATABYTE.


THBYTE

DATABYTE.
'!0'03
Figure 7. SPI

STBYTE



3-
SUBADDRESS.
27
NDBYTE
DATABYTE.


RDBYTE
DATABYTE.


THBYTE

DATABYTE.
'!0'03
Data auto increment mode is always active regardless of the serial bus mode chosen.
18/61
Doc ID 13311 Rev 4