ST72321J Datasheet, PDF (173/179 Pages) STMicroelectronics – 8-BIT MCU WITH NESTED INTERRUPTS, FLASH, 10-BIT ADC, 5 TIMERS, SPI, SCI, I2C INTERFACE

ST72321J
DEVICE CONFIGURATION AND ORDERING INFORMATION (Cont’d)
14.3 DEVELOPMENT TOOLS
STMicroelectronics offers a range of hardware
and software development tools for the ST7 micro-
controller family. Full details of tools available for
the ST7 from third party manufacturers can be ob-
tain from the STMicroelectronics Internet site:
ª http//mcu.st.com.
Tools from these manufacturers include C compli-
ers, emulators and gang programmers.
ST Emulators
The emulator is delivered with everything (probes,
TEB, adapters etc.) needed to start emulating the
devices. To configure the emulator to emulate dif-
ferent ST7 subfamily devices, the active probe for
the ST7 EMU3 can be changed and the ST7EMU3
probe is designed for easy interchange of TEBs
(Target Emulation Board). See Table 29 for more
details.
14.3.1 Socket and Emulator Adapter
Information
For information on the type of socket that is sup-
plied with the emulator, refer to the suggested list
of sockets in Table 30.
Note: Before designing the board layout, it is rec-
ommended to check the overall dimensions of the
socket as they may be greater than the dimen-
sions of the device.
For footprint and other mechanical information
about these sockets and adapters, refer to the
manufacturer’s datasheet (www.yamaichi.de for
TQFP44 10 x 10 ).
Table 29. STMicroelectronics Development Tools
Supported Products
ST7 Evaluation
Board
ST7 Emulator
ST72321J, ST72F321J
ST7MDT2-TRAIN/
EU ST7MDT2-
TRAIN/US
ST7MDT2-TRAIN/
UK
ST7MDT20J-
EMU3
Active Probe &
T.E.B.
ST7 Programming Board
ST7MDT20J-TEB
ST7MDT20J-EPB/EU
ST7MDT20J-EPB/US
ST7MDT20J-EPB/UK
Note:
1. Flash Programming interface for FLASH devices.
Table 30. Suggested List of Socket Types
Device
TQFP44 10 X10
Socket (supplied with
ST7MDT20J-EMU3)
YAMAICHI IC149-044-*52-*5
Emulator Adapter (supplied with
ST7MDT20J-EMU3)
YAMAICHI ICP-044-5
173/179