ST10F280_12 Datasheet, PDF (16/239 Pages) STMicroelectronics – 16-bit MCU with MAC unit, 512 Kbyte Flash memory and 18 Kbyte RAM

Ball data
ST10F280
Table 1. Ball description (continued)
Symbol
Ball
number
Type
Function
Port 7 is an 8-bit bidirectional I/O port. It is bit-wise programmable
for input or output via direction bits. For a pin configured as input,
the output driver is put into high-impedance state. Port 7 outputs
I/O _{can be configured as push/pull or open drain drivers. The input}
threshold of Port 7 is selectable (TTL or special).
The following Port 7 pins also serve for alternate functions:
J4
O P7.0 POUT0 PWM Channel 0 Output
P7.0 – P7.7
J3
O P7.1 POUT1 PWM Channel 1 Output
J2
O P7.2 POUT2 PWM Channel 2 Output
J1
O P7.3 POUT3 PWM Channel 3 Output
K2 I/O P7.4 CC28IO CAPCOM2: CC28 Capture Input / Compare Output
K3 I/O P7.5 CC29IO CAPCOM2: CC29 Capture Input / Compare Output
K4 I/O P7.6 CC30IO CAPCOM2: CC30 Capture Input / Compare Output
L2 I/O P7.7 CC31IO CAPCOM2: CC31 Capture Input / Compare Output
XPort 10 is a 16-bit input-only port with Schmitt-Trigger
characteristics.
I _{The pins of XPort10 also serve as the analog input channels (up to}
16) for the A/D converter, where XP10.X equals ANx (Analog input
channel x).
M4
I XP10.0
M3
I XP10.1
M2
I XP10.2
M1
I XP10.3
N4
I XP10.4
XP10.0 –
N3
I XP10.5
XP10.15
N2
I XP10.6
N1
I XP10.7
P4
I XP10.8
P3
I XP10.9
P2
I XP10.10
P1
I XP10.11
R2
I XP10.12
R1
I XP10.13
T1
I XP10.14
U1
I XP10.15
16/239
Doc ID 8673 Rev. 3