TN1206 Datasheet, PDF (11/16 Pages) STMicroelectronics – Tape and reel shipping media for STM8 and STM32 microcontrollers in QFP packages

TN1206
Carrier tape mechanical dimensions
Table 4. Carrier tape variable dimensions (width ≤ 24 mm)
Tape
width
B1
E2
F
P1
T2 max. W max. A0, B0, K0 Unit
16 mm
12.1
24 mm
20.1
14.25
22.25
7.5±0.1
11.5±0.1
12.0±0.1
16.0±0.1
8.0
12.0
16.3
24.3
See ⁽¹⁾
mm
1. The cavity defined by A0, B0 and K0 surrounds the component with sufficient clearance so that:
- The component does not protrude above the top surface of the carrier tape.
- The component can be removed vertically from the cavity without mechanical restriction, after the top cover tape has
been removed.
- Rotation of the component is limited to 20° maximum for 12 mm tapes and to 10° maximum for 16 mm and 24mm tapes.
- Lateral movements of the component are restricted to 1.0 mm maximum for 16 mm and 24 mm tapes.
5.2
Carrier tape width > 24 mm
Possible widths are 32 and 44 mm (refer to Table 1: QFP packages available in tape and
reel packing).
Figure 6. Embossed carrier tape (width > 24 mm)
DocID027388 Rev 3
11/16
15