|
TN1206 Datasheet, PDF (1/16 Pages) STMicroelectronics – Tape and reel shipping media for STM8 and STM32 microcontrollers in QFP packages | |||
|
TN1206
Technical note
Tape and reel shipping media for STM8 and STM32
microcontrollers in QFP packages
Introduction
QFP packages can be supplied in tape and reel shipping media.
The reels have a 13â typical diameter.
The types of reel used are in plastic either anti static or conductive, with a black conductive
cavity tape. The cover tape is transparent anti static or conductive.
The devices are positioned in the cavities with the identifying pin (normally Pin â1â) on the
same side as the sprocket holes in the tape.
STMicroelectronics tape and reels are compliant with EIA 481 and IEC 60286-3 standard
specifications.
Table 1 lists the QFP packages available for STM8 and STM32 microcontrollers, as well as
the corresponding shipping media.
Package
TQFP 10x10
TQFP 14x14
TQFP 20x20
TQFP 7x7
Table 1. QFP packages available in tape and reel packing
Description
Package Reel
Tape
code diameter width
Tape
pitch
LQFP44 leads, 10x10x1.4 mm, 1.0 mm
LQFP64 leads, 10x10x1.4 mm, 1 mm
LQFP52 leads, 10x10x1.4 mm
LQFP100 leads, 14x14x1.4 mm 1 mm
LQFP64 leads, 14x14x1.4 mm, 1 mm
LQFP80 leads, 14x14x1.4 mm, 1 mm
LQFP128 leads, 14x14x1.4 mm, 1.0 mm
LQFP144 leads, 20x20x1.4 mm, 2 mm
LQFP48 leads, 7x7x1.4 mm, 1 mm
LQFP32,leads, 7x7x1.4 mm, 1 mm
4Y
5W
24 mm 16 mm
DC
1L
1R
13â
32 mm 24 mm
1S
TC
1A
44 mm 32 mm
5B
16 mm 12 mm
5V
April 2015
DocID027388 Rev 3
1/16
www.st.com
1
|
▷ |