VNL5090N3TR-E Datasheet, PDF (1/28 Pages) STMicroelectronics – OMNIFET III fully protected low-side driver

2
3
2
1
SOT-223
SO-8
Features
Type
VNL5090N3-E
VNL5090S5-E
V_clamp
41 V
R_DS(on)
90 mΩ
I_D
13 A
• Automotive qualified
• Drain current: 13 A
• ESD protection
• Overvoltage clamp
• Thermal shutdown
• Current and power limitation
• Very low standby current
• Very low electromagnetic susceptibility
• Compliant with European directive 2002/95/EC
• Open drain status output (Root part number 2
only)
• Specially intended for 2 x R10W or 4 x R5W
automotive signal lamps
VNL5090N3-E
VNL5090S5-E
OMNIFET III
fully protected low-side driver
Datasheet - production data
Description
The VNL5090N3-E and VNL5090S5-E are
monolithic devices made using
STMicroelectronics^® VIPower^® technology,
intended for driving resistive or inductive loads
with one side connected to the battery. Built-in
thermal shutdown protects the chip from
overtemperature and short-circuit.
Output current limitation protects the devices in
an overload condition. In case of long duration
overload, the device limits the dissipated power to
a safe level up to thermal shutdown
intervention.Thermal shutdown, with automatic
restart, allows the devices to recover normal
operation as soon as a fault condition disappears.
Fast demagnetization of inductive loads is
achieved at turn-off.
Package
SOT-223
SO-8
Table 1. Devices summary
Order codes
Tube
VNL5090N3-E
VNL5090S5-E
Tape and reel
VNL5090N3TR-E
VNL5090S5TR-E
November 2013
This is information on a product in full production.
DocID022568 Rev 6
1/28
www.st.com