VND810SP-E Datasheet, PDF (1/28 Pages) STMicroelectronics – Double channel high-side driver

VND810SP-E
Double channel high-side driver
Features
Type
VND810SP-E
R_DS(on)
160 mΩ ⁽¹⁾
1. Per each channel.
I_out
3.5 A⁽¹⁾
V_CC
36 V
■ ECOPACK^®: lead free and RoHS compliant
■ Automotive Grade: compliance with AEC
guidelines
■ Very low standby current
■ CMOS compatible input
■ On-state open-load detection
■ Off-state open-load detection
■ Thermal shutdown protection and diagnosis
■ Undervoltage shutdown
■ Overvoltage clamp
■ Output stuck to V_CC detection
■ Load current limitation
■ Reverse battery protection
■ Electrostatic discharge protection
10
1
PowerSO-10™
Description
The VND810SP-E is a monolithic device made by
using STMicroelectronics™ VIPower™ M0-3
technology, intended for driving any kind of load
with one side connected to ground.
Active V_CC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
Active current limitation combined with thermal
shutdown and automatic restart protects the
device against overload. The device detects
open-load condition both in on-state and
off-state. Output shorted to V_CC is detected in the
off-state. Device automatically turns-off in case of
ground pin disconnection.
Table 1. Order codes
Package
PowerSO-10™
October 2010
Tube
VND810SP-E
Order code
Tape and reel
VND810SPTR-E
Doc ID 10880 Rev 3
1/28
www.st.com
1