|
VN5E025MJTR-E Datasheet, PDF (1/37 Pages) STMicroelectronics – Single channel high-side driver with analog current sense for automotive applications | |||
|
VN5E025AJ-E
Single channel high-side driver with analog current sense
for automotive applications
Features
Max supply voltage
VCC
Operating voltage range
VCC
Max On-State resistance
RON
Current limitation (typ)
ILIMH
Off state supply current
IS
1. Typical value with all loads connected.
41 V
4.5 to 28 V
25 mΩ
60 A
2 µA(1)
â General
â Inrush current active management by
power limitation
â Very low stand-by current
â 3.0 V CMOS compatible inputs
â Optimized electromagnetic emissions
â Very low electromagnetic susceptibility
â In compliance with the 2002/95/EC
european directive
â Very low current sense leakage
â Diagnostic functions
â Proportional load current sense
â High current sense precision for wide
currents range
â Current sense disable
â Off state openload detection
â Output short to VCC detection
â Overload and short to ground (power
limitation) indication
â Thermal shutdown indication
â Protections
â Undervoltage shutdown
â Overvoltage clamp
â Load current limitation
â Self limiting of fast thermal transients
â Protection against loss of ground and loss
of VCC
â Over-temperature shutdown with
autorestart (thermal shutdown)
PowerSSO-12
â Reverse battery protected
â Electrostatic discharge protection
Application
â All types of resistive, inductive and capacitive
loads
â Suitable as LED driver
Description
The VN5E025AJ-E is a single channel high-side
driver manufactured in the ST proprietary
VIPower M0-5 technology and housed in the tiny
PowerSSO-12 package. The VN5E025AJ-E is
designed to drive 12 V automotive grounded
loads delivering protection, diagnostics and easy
3 V and 5 V CMOS compatible interface with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, over-temperature shut-off with auto-
restart and over-voltage active clamp. A dedicated
analog current sense pin is associated with every
output channel in order to provide Ehnanced
diagnostic functions including fast detection of
overload and short-circuit to ground through
power limitation indication, over-temperature
indication, short-circuit to VCC diagnosis and ON-
state and OFF-state open load detection.
The current sensing and diagnostic feedback of
the whole device can be disabled by pulling the
CS_DIS pin high to allow sharing of the external
sense resistor with other similar devices
May 2010
Doc ID 13106 Rev 4
1/37
www.st.com
1
|
▷ |