UM0225 Datasheet, PDF (1/57 Pages) STMicroelectronics – Configuration and programming software

UM0225
User manual
Configuration and programming software (CAPS) tool
for STR9 families
Introduction
Configuration and Programming Software (CAPS) is the configuration software for the STR9 family
microcontroller. The CAPS configuration tool allows you to easily configure the STR9 using simple drag-
and-drop and point-and-click operations. CAPS also supports In-System-Programming through an
external JTAG adapter, allowing fast In-System-Programming of the STR9 in both development and
production environments.
This is the CAPS user manual, describing CAPS software functionality. When working with the CAPS
tool, you are also encouraged to download the datasheet associated with your particular device; the
datasheet may provide the only source of important configuration information needed for your design.
t(s) ^{Getting started gives an introduction to CAPS installation procedures and hardware requirements.}
Although installation may seem trivial, it is highly recommended that you carefully follow the instructions
c _{because many problems are often caused by incorrectly installing CAPS.}
du _{This is followed by Introduction to the CAPS user interface, which describes general CAPS usability and}
ro _{the design process.}
P _{The Designing with CAPS section gives detailed information about each CAPS feature.}
Obsolete ^{Product(s) - Obsolete The appendices provide reference material useful for design and analysis.}
August 2006
Rev 2
1/56
www.st.com
1