STR710-EVAL Datasheet, PDF (1/27 Pages) STMicroelectronics – Evaluation Board for STR71xF

STR710-EVAL
Evaluation Board for STR71xF
STR710-EVAL board
Host to JTAG
interface
High speed JTAG
debug port
connection
Main components
■ STR710F processor running at 48 MHz
■ EMI SRAM 4 Mbytes (2M x 16)
■ EMI flash 4 Mbytes (2M x 16)
■ SPI serial flash
■ I²C EEPROM
■ LCD display
Features
■ Support for the following interfaces:
– USB
– CAN
– RS232
■ LED displays
■ Buzzer
■ Test buttons
■ JTAG connector
October 2005
Description
The STR710-EVAL board is a complete
development platform for the STR71x series. It is
a cost effective, flexible and open design to
demonstrate the capability of the STR71x series
of flash microcontrollers and to enable rapid
evaluation of the STR71x devices and
peripherals. It includes the high performance
STR710FZ2T6 ARM7TDMI^TM device with 256
Kbytes embedded flash with “best-in-class”
random access time, 64 Kbytes on-chip high
speed SRAM and up to 10 serial communication
interfaces, including USB and CAN.
The STR710-EVAL board includes SRAM and
flash memory on the EMI to enable full freedom in
development of large programs before custom
hardware is designed. It integrates a 2 x 16 LCD,
LEDs, UART, CAN, USB interfaces, piezo buzzer
and test buttons in a versatile stand-alone test
platform. A wide choice of third party development
tool support is readily available, in addition to
those available from STMicroelectronics.
Rev 2
1/27
www.st.com
1