ST6373 Datasheet, PDF (1/64 Pages) STMicroelectronics – 8-BIT ROM/OTP/EPROM MCUs FOR DIGITALLY CONTROLLED MULTISYNC/MULTISTANDARD MONITORS

R
ST6373
8-BIT ROM/OTP/EPROM MCUs FOR DIGITALLY
CONTROLLED MULTISYNC/MULTISTANDARD MONITORS
s 4.5V to 6V Operating Supply Voltage Range
s Low Current Consumption
s 0 to +70°C Operating Temperature Range
s 8 MHz clock Oscillator
s 16K bytes ROM/OTP/EPROM
(8K and 12K ROM versions also available)
s 192 bytes RAM
s 384 bytes general purpose EEPROM
s 128 bytes dedicated EEPROM for DDC SPI
s 22 fully programmable I/O pins, offering direct
LED drive capability, as well as interrupt
generation for keyboard inputs
s Digital WATCHDOG timer
s Three Timers, each comprising an 8-bit counter
and a 7- bit Prescaler
s SYNC Processor:
– 12-bits HSYNC Event Counter
– 12-bits VSYNC Period Counter
– HSYNC and VSYNC Polarity Detection
– HSYNC and VSYNC Outputs
– HFLYBACK and VFLYBACK Inputs
– CLAMP and BLANK Outputs
s 14-bit (PWM + BRM) D/A Converter
s Nine 7-bit PWM D/A Converter Outputs
s 8-bit A/D Converter with 8 multiplexed inputs
s DDC SPI with interrupt and 4 operating modes
s A further SPI with interrupt and 2 operating
modes
s Remote Control Signal Input (Non Maskable
Interrupt)
s VSYNC Interrupt Input
s Five Interrupt Vectors
s XOR Register (Instruction Set expansion)
s MIRROR Register (Instruction Set expansion)
PSDIP42
CSDIP42
(Refer to end of Document for Ordering Information)
February 1998
This is advance information from SGS-THOMS ON. Details are subject to change withoutnotice.
1/64
1