|
L99DZ100G Datasheet, PDF (1/197 Pages) – | |||
|
L99DZ100G, L99DZ100GP
Automotive door module with LIN and HS-CAN (L99DZ100G) or
HS-CAN supporting selective wake up (L99DZ100GP)
Datasheet - production data
Features
ï· AEC Q100 compliant qualified
ï· 1 half bridge for 7.5 A load (RON = 100 mâ¦)
ï· 1 half bridge for 7.5 A load (RON = 150 mâ¦)
ï· 2 half bridges for 0.5 A load (RON = 2000 mâ¦)
ï· 2 half bridges for 3 A load (RON = 300 mâ¦)
ï· 1 configurable high-side driver for up to 1.5 A
(RON = 500 mâ¦) or 0.35 A (RON = 1600 mâ¦)
load
ï· 1 configurable high-side driver for 0.8 A
(RON = 800 mâ¦) or 0.35 A (RON = 1600 mâ¦)
load
ï· 3 configurable high-side drivers for
0.15 A/0.35 A (RON =2 â¦)
ï· 1 configurable high-side driver for 0.25 A/0.5 A
(RON = 2 â¦) to supply EC Glass MOSFET
ï· 4 configurable high-side drivers for
0.15 A/0.25 A (RON = 5 â¦)
ï· Internal 10bit PWM timer for each stand-alone
high-side driver
ï· Buffered supply for voltage regulators and 2
high-side drivers (OUT15 & OUT_HS / both ï
P-channel) to supply e.g. external contacts
ï· Programmable soft-start function to drive loads
with higher inrush currents as current limitation
value (for OUT1-6, OUT7, OUT8 and
OUT_HS) with thermal expiration feature
ï· All the embedded outputs come with protection
and supervision features:
â Current Monitor (high-side only)
â Open-load
â Overcurrent
â Thermal warning
â Thermal shutdown
ï· Fully protected driver for external MOSFETs in
H-bridge configuration or dual Half bridge
configuration
ï· Fully protected driver for external high-side
MOSFET
ï· Control block for electro-chromic element
ï· Two 5 V voltage regulators for microcontroller
and peripheral supply
ï· Programmable reset generator for power-on
and undervoltage
ï· Configurable window watchdog
ï· LIN 2.2a compliant (SAEJ2602 compatible)
transceiver
ï· Advanced high speed CAN transceiver (ISO
11898-2:2003 /-5:2007 and SAE J2284
compliant) with local failure and bus failure
diagnosis and selective wake-up functionality
according to ISO 11898-6:2013
ï· Separated (Isolated) fail-safe block with 2 LS
(RON = 1 â¦) to pull down the gates of the
external HS MOSFETs
ï· Thermal clusters
ï· A/D conversion of supply voltages and internal
temperature sensors
ï· Embedded and programmable VS duty cycle
adjustment for LED driver outputs
Applications
Door zone applications.
September 2016
This is information on a product in full production.
DocID029077 Rev 4
1/197
www.st.com
|
▷ |