|
L9660 Datasheet, PDF (1/49 Pages) STMicroelectronics – Quad squib driver ASIC for safety application | |||
|
L9660
Quad squib driver ASIC for safety application
Datasheet - production data
'!0'03
LQFP64 (10x10x1.4mm)
Features
ï· 4 deployment drivers with SPI selectable firing
current and times
ï· Capability to deploy the squib with 1.2 A
(min)/2 ms, 1.75 A (min)/1.0 ms and 1.75 A
(min)/0.65 ms between VRES of 7 V to 37 V
ï· Capability to deploy the squib with 1.5 A
(min)/2 ms between VRES of 7 V to 25 V
ï· Firing capability to deploy all channels
simultaneously
ï· Independently controlled high-side and low-
side MOS for diagnosis
ï· Analog output available for resistance
measurement
ï· Squib short to ground, short to battery and
MOS diagnostic available on SPI register
ï· Capability to deploy the squib when the low
side MOS is shorted to ground
ï· 2 fire enable inputs
ï· 5.5 MHz SPI interface
ï· Low voltage internal reset
ï· 2 kV ESD capability on all pins
ï· Package: LQFP64
ï· Technology: ST proprietary BCD5 (0.65µm)
ï· RoHS compliant
Description
The L9660 is intended to deploy up to 4 squibs.
Squib drivers are sized to deploy 1.2 A minimum
for 2 ms, 1.75 A minimum for 1 ms and 1.75 A
minimum for 0.65 ms during load dump along with
1.5 A minimum for 2 ms for VRES voltages less
than 25 V.
Full diagnostic capabilities of the squib interface
are provided.
Order code
L9660
L9660TR
Table 1. Device summary
Amb. temp range, ï°C
Package
-40 to +95
LQFP64
-40 to +95
LQFP64
Packing
Tray
Tape and reel
September 2013
This is information on a product in full production.
DocID024714 Rev 2
1/49
www.st.com
|
▷ |