IPS160H Datasheet, PDF (1/26 Pages) STMicroelectronics – Single high-side switch

IPS160H
Single high-side switch
Datasheet - preliminary data
Features
RDS(on)
0.060 Ω
PowerSSO12
IOUT
2.5 A
VCC
65 V
 8 V to 60 V operating voltage range
 Minimum output current limitation: 2.6 A
 Non-dissipative short-circuit protection (cut-
off)
 Programmable cut-off delay time using
external capacitor
 Diagnostic signalization for: open load in off-
state, cut-off and junction thermal shutdown
 Fast demagnetization of inductive load
 Ground disconnection protection
 VCC disconnection protection
 Undervoltage lock-out
 Designed to meet IEC 61131-2
 PSSO12 package
Applications
 Programmable logic control
 Industrial PC peripheral input/output
 Numerical control machines
 SIL applications
Description
The IPS160H is a monolithic device which can
drive capacitive, resistive or inductive loads with
one side connected to ground; it is specifically
designed to match safety integrity level (SIL)
applications.
Built-in thermal shutdown protects the chip
against overtemperature and short-circuit. In
order to minimize the power dissipation when the
output is shorted, a non-dissipative short-circuit
protection (cut-off) is implemented, it limits both
the output average current value and,
consequently, the device overheating. The DIAG
common diagnostic pin reports the thermal
shutdown, open load in off-state and cut-off.
Cut-off delay time can be programmed by an
external capacitor.
Table 1: Device summary
Order code
Package
Packing
IPS160H
PowerSSO12
Tube
IPS160HTR PowerSSO12 Tape and reel
November 2015
DocID027563 Rev 2
This is preliminary information on a new product now in development
or undergoing evaluation. Details are subject to change without notice.
1/26
www.st.com