HDMIULC6-4SC6Y Datasheet, PDF (1/12 Pages) STMicroelectronics – Automotive ultralarge bandwidth ESD protection

HDMIULC6-4SC6Y
Automotive ultralarge bandwidth ESD protection
Features
■ 4-line 15 kV ESD protection
■ Protects V_BUS when applicable
■ Ultrahigh bandwidth - no influence on signal
rise and fall times - maximized number of signal
harmonics
■ Very low leakage current: 0.5 µA max.
■ Fast response time compared with varistors
■ SOT23-6L package
■ RoHS compliant
Benefits
■ ESD standards compliance guaranteed at
device level, hence greater immunity at system
level
■ ESD protection of V_BUS when applicable.
■ High efficiency due to low residual voltage
when confronted by an ESD surge
■ Minimized rise and fall times for maximum data
integrity
■ Consistent D+ / D- signal balance:
– Ultralow impact on intra-, inter-pair skew
– Matching high bit rate HDMI requirements
and ready for future evolution
■ Low PCB space occupation - 9 mm² maximum
footprint
■ Higher reliability offered by monolithic
integration
Complies with these standards:
■ IEC 61000-4-2 level 4
– 15 kV air discharge
– 8 kV (and up to 15 kV) contact discharge
Datasheet  production data
SOT23-6L
(JEDEC MO178AB)
Applications
■ HDMI ports at 1.65 Gb/s and up to 3.2 Gb/s
■ IEEE 1394a, b, or c up to 3.2 Gb/s
■ USB 2.0 ports up to 480 Mb/s (Hi-Speed)
■ Ethernet port: 10/100/1000 Mb/s
■ Video line protection
■ AEC-Q101 qualified
Description
The HDMIULC6-4SC6Y is a monolithic,
application specific discrete device dedicated to
ESD protection of the HDMI connection. It also
offers the same high level of protection for
IEEE 1394a and IEEE 1394b/c, USB 2.0,
Ethernet links, and video lines.
Its ultrahigh cutoff frequency (5.3 GHz) secures a
high level of signal integrity. The device topology
provides this integrity without compromising the
complete protection of ICs against the most
stringent ESD strikes.
September 2012
This is information on a product in full production.
Doc ID 018879 Rev 2
1/12
www.st.com
12