HCC4047B Datasheet, PDF (1/15 Pages) STMicroelectronics – LOW-POWELOW-POWER MONOSTABLE/ASTABLE MULTIVIBRATOR

HCC/HCF4047B
LOW-POWER MONOSTABLE/ASTABLE MULTIVIBRATOR
. LOW POWER CONSUMPTION : SPECIAL
COS/MOS OSCILLATOR CONFIGURATION
. MONOSTABLE (one-shot) OR ASTABLE (free-
running) OPERATION
. TRUE AND COMPLEMENTED BUFFERED
OUTPUTS
. ONLY ONE EXTERNAL R AND C REQUIRED
. BUFFERED INPUTS
. QUIESCENT CURRENT SPECIFIED TO 20V
FOR HCC DEVICE
. STANDARDIZED, SYMMETRICAL OUTPUT
CHARACTERISTICS
. 5V, 10V, AND 15V PARAMETRIC RATINGS
. INPUT CURRENT OF 100nA AT 18V AND 25°C
FOR HCC DEVICE
. 100% TESTED FOR QUIESCENT CURRENT
. MEETS ALL REQUIREMENTS OF JEDECTEN-
TATIVE STANDARD N° 13A, ”STANDARD SPE-
CIFICATIONS FOR DESCRIPTION OF ”B”
SERIES CMOS DEVICES”
EY
F
(Plastic Package) (Ceramic Frit Seal Package)
M1
(Micro Package)
C1
(Plastic Chip Carrier)
ORDER CODES :
HCC4047BF
HCF4047BM1
HCF4047BEY
HCF4047BC1
PIN CONNECTIONS
DESCRIPTION
The HCC4047B (extended temperature range) and
HCF4047B (intermediate temperature range) are
monolithic integrated circuits, available in 14-lead
dual in-line plastic or ceramic package and plas-
tic micropackage. The HCC/HCF4047B consists of
a gatable astable multivibrator with logic techniques
incorporated to permit positive or negative edge-
triggered monostable multivibrator action with retrig-
gering and external counting options. Inputs include
+TRIGGER -TRIGGER, ASTABLE, ASTABLE, RE-
TRIGGER, and EXTERNAL RESET. Buffered out-
puts are Q, Q, and OSCILLATOR. In all modes of
operation, an external capacitor must be connected
between C-Timing and RC-Common terminals, and
an external resistor must be connected between the
R-Timing and RC-Common terminals. For operating
modes see functional terminal connections and ap-
plication notes.
June 1989
1/15