HCC4041UB Datasheet, PDF (1/12 Pages) STMicroelectronics – QUAD TRUE/COMPLEMENT BUFFER

HCC/HCF4041UB
QUAD TRUE/COMPLEMENT BUFFER
. BALANCED SINK AND SOURCE CURRENT ;
APPROXIMATELY 4 TIMES STANDARD ”B”
DRIVE
. EQUALIZED DELAY TO TRUE AND COMPLE-
MENT OUTPUTS
. QUIESCENT CURRENT SPECIFIED TO 20V
FOR HCC DEVICE
. 5V, 10V AND 15V PARAMETRIC RATINGS
. INPUT CURRENT OF 100nA AT 18V AND 25°C
FOR HCC DEVICE
. 100 % TESTED FOR QUIESCENT CURRENT
. MEETS ALL REQUIREMENTS OF JEDECTEN-
TATIVE STANDARD N° 13A, ”STANDARD SPE-
CIFICATIONS FOR DESCRIPTION OF ”B”
SERIES CMOS DEVICES”
EY
F
(Plastic Package) (Ceramic Frit Seal Package)
M1
(Micro Package)
C1
(Plastic Chip Carrier)
ORDER CODES :
HCC4041BF
HCF4041BM1
HCF4041BEY
HCF4041BC1
PIN CONNECTIONS
DESCRIPTION
The HCC4041UB (extended temperature range)
and HCF4041UB (intermediate temperature range)
are monolithic integrated circuits, available in 14-
lead dual in-line plastic or ceramic package and
plastic micro package.
The HCC/HCF4041UB types are quad true/comple-
ment buffers consisting of n- and p-channel units
having low channel resistance and high current
(sourcing and sinking) capability. The HCC/-
HCF4041UB is intended for use as a buffer, line
driver, or COS/MOS-to-TTL driver. It can be used as
an ultra-low power resistor-network driver for A/D
and D/A conversion, as a transmission-line driver,
and in other applications where high noise immunity
and low-power dissipation are primary design re-
quirements.
June 1989
1/12