HCC4015B Datasheet, PDF (1/12 Pages) STMicroelectronics – DUAL 4-STAGE STATIC SHIFT REGISTER WITH SERIAL INPUT/PARALLEL OUTPUT

HCC/HCF4015B
DUAL 4-STAGE STATIC SHIFT REGISTER WITH SERIAL
INPUT/PARALLEL OUTPUT
. MEDIUM SPEED OPERATION : 12MHz (typ.)
CLOCK RATE AT VDD - VSS = 10V
. FULLY STATIC OPERATION
. 8 MASTER-SLAVE FLIP-FLOPS PLUS INPUT
AND OUTPUT BUFFERING
. HIGH NOISE IMMUNITY
. QUIESCENT CURRENT SPECIFIED TO 20V
FOR HCC DEVICE
. INPUT CURRENT OF 100nA AT 18V AND 25°C
FOR HCC DEVICE
. 100% TESTED FOR QUIESCENT CURRENT
. 5V, 10V, AND 15V PARAMETRIC RATINGS
. MEETS ALL REQUIREMENTS OF JEDECTEN-
TATIVE STANDARD N^O. 13A, ”STANDARD
SPECIFICATIONS FOR DESCRIPTION OF ”B”
SERIES CMOS DEVICES”
EY
F
(Plastic Package) (Ceramic Frit Seal Package)
M1
(Micro Package)
C1
(Plastic Chip Carrier)
ORDER CODES :
HCC4015BF HCF4015BM1
HCF4015BEY HCF4015BC1
PIN CONNECTIONS
DESCRIPTION
The HCC4015B (extended temperature range) and
HCF4015B (intermediate temperature range) are
monolithic integrated circuits, available in 16-lead
dual in-line plastic or ceramic package and plastic
micropackage.
The HCC/HCF4015B consists of two identical, inde-
pendent, 4-stage serial-input/parallel-output registers.
Each register has independent CLOCK and RESET
inputs as well as a single serial DATA input. ”Q” out-
puts are available from each of the four stages on both
registers. All register stages are D-type, master-slave
flip-flops. The logic level present at the DATA input is
transferred into the first register stage and shifted over
one stage at each positive-going clock transition. Re-
setting of all stages is accomplished by a high level on
the reset line. Register expansion to 8 stages using
one HCC/HCF4015B package, or to more than 8
stages using additional HCC/HCF4015B’s is possible.
June 1989
1/12