HCC4013B Datasheet, PDF (1/11 Pages) STMicroelectronics – DUAL ’D’ . TYPE FLIP.FLOP

HCC/HCF4013B
.. SET-RESET CAPABILITY
STATIC FLIP-FLOP OPERATION - RETAINS
STATE INDEFINITELY WITH CLOCK LEVEL
EITHER ”HIGH” OR ”LOW”
. MEDIUM-SPEED OPERATION - 16MHz (typ.)
CLOCK TOGGLE RATE AT 10V
. QUIESCENT CURRENT SPECIFIED TO 20V
FOR HCC DEVICE
. STANDARDIZED SYMMETRICAL OUTPUT
CHARACTERISTICS
. 5V, 10V, AND 15V PARAMETRIC RATINGS
. INPUT CURRENT OF 100nA AT 18V AND 25°C
FOR HCC DEVICE
. 100% TESTED FOR QUIESCENT CURRENT
. MEETS ALL REQUIREMENTS OF JEDECTEN-
TATIVE STANDARD No. 13A, ”STANDARD
SPECIFICATIONS FOR DESCRIPTION OF ”B”
SERIES CMOS DEVICES”
DUAL ’D’ – TYPE FLIP–FLOP
EY
F
(Plastic Package) _{(Ceramic Frit Seal Package)}
M1
(Micro Package)
C1
(Plastic Chip Carrier)
ORDER CODES :
HCC4013BF HCF4013BM1
HCF4013BEY HCF4013BC1
PIN CONNECTIONS
DESCRIPTION
The HCC4013B (extended temperature range) and
HCF4013B (intermediate temperature range) are
monolithic integrated circuits, available in 14-lead
dual in-line plastic or ceramic package and plastic
micropackage.
The HCC/HCF4013B consists of two identical, inde-
pendent data-type flip-flops. Each flip-flop has inde-
pendent data, set, reset, and clock inputs and Q and
Q outputs. These devices can be used for shift reg-
ister applications, and, by connecting Q output to the
data input, for counter and toggle applications. The
logic level present at the D input is transferred to the
Q output during the positive-going transition of the
clock pulse. Setting or resetting is independent of
the clock and is accomplished by a high level on the
set or reset line, respectively.
June 1989
1/11