AN970 Datasheet, PDF (1/10 Pages) STMicroelectronics – SPI COMMUNICATION BETWEEN ST7 AND EEPROM

AN970
APPLICATION NOTE
SPI COMMUNICATION BETWEEN ST7 AND EEPROM
by 8-Bit Micro Application Team
INTRODUCTION
The goal of this application note is to present a practical example of communication using the
SPI peripheral of the ST7.
It shows an easy way of communicating between a ST7 microcontroller and a M95xxx SPI
EEPROM. The purpose is to perform, through SPI, a write in the memory, followed by a read
of the written data.
AN970/0802
1/10
1