AN4471 Datasheet, PDF (1/39 Pages) STMicroelectronics – STEVAL-IME009V1 evaluation board based on the STHV800 high voltage pulser

AN4471
Application note
STEVAL-IME009V1 evaluation board based on the STHV800 high
voltage pulser
Introduction
The STEVAL-IME009V1 is an evaluation board designed around the STHV800
transmission pulser, which is a state-of-the-art product for ultrasound imaging applications.
The system permits four transducers to be driven as 8-channel transmitters; the output
waveforms can be displayed directly on an oscilloscope by connecting the scope probe on
the relative BNCs.
16 preset waveforms are available to test the HV pulser under different conditions.
Figure 1. Photo of STEVAL-IME009V1
Warning: Before applying any voltage to the STEVAL-IME009V1, please
read the instructions in this document carefully.
October 2014
DocID026197 Rev 1
1/39
www.st.com