AN3023 Datasheet, PDF (1/23 Pages) STMicroelectronics – Using the analog-to-digital converter of the STM8A microcontroller

AN3023
Application note
Using the analog-to-digital converter of the STM8A microcontroller
Introduction
The purpose of this application note is to explain how to use the analog-to-digital converter
implemented in the STM8A microcontroller family. The document provides useful
information on how to configure the ADC registers and microcontroller resources and use
the analog-to-digital converter in different modes.
The STM8A firmware library, containing source code of all the examples described in this
application note, can be downloaded from the STMicroelectronics website: www.st.com.
October 2009
Doc ID 16113 Rev 1
1/23
www.st.com