SPW1653JPTE-12-TR Datasheet, PDF (13/24 Pages) STANLEY ELECTRIC CO.,LTD. – ・6 Dies product, Special color emitting LED (Purplish Pink)

Handling Precaution
SPW1653JPTE-12-TR
【Handling Precautions for Product Mounting】
＜Recommendation＞
1. Picking up point with nozzle: Lamp housing of the product (
(Shown below)
area)
The picking up point should be within lamp housing portion, because the silicone resin used for the
encapsulant is soft. (If the nozzle makes contact with the encapsulant, the products might be destroyed)
Non allowed pick up area (Encapsulant portion ）
Load：Less than １０Ｎ
(to avoid the product breaking)
Pick up point （Lamphousing portion )
Encapsulant portion is the state of the hollow
Please adjust the load, the pick up point, the nozzle diameter, etc. before mounting because
the over load can cause the breakage of the lamp housing.
2013.10.08
Page : 13