JGN1104LS-AR Datasheet, PDF (11/23 Pages) STANLEY ELECTRIC CO.,LTD. – Wide range temperature applicable product

Handling Precaution
JGN1104LS-AR
【Other Precautions】
1. Stanley LED Lamps have semiconductor characteristics and are designed to ensure high reliability. However,
the performance may vary depending on usage conditions
2. Absolute Maximum Ratings are set to prevent LED lamps from failing due to excess stress( temperature,
current, voltage, etc.). Usage conditions must not exceed the ratings for a moment, nor do reach one item of
absolute maximum ratings simultaneously.
3. In order to ensure high reliability from LED Lamps, variable factors that arise in actual usage conditions
should be taken into account for designing. ( Derating of TYP., MAX Forward Voltage, etc.)
4. Please insert Protective Resistors into the circuit in order to stabilize LED operation and to prevent the device
from igniting due to excess current.
5. Please avoid the stick of foreign material because molding resin in the products have adhesiveness. Also
please don't touch lens portion.
6. Please check the actual performance in the assembly because the Specification Sheets are described for LED
device only.
7. Please refrain from looking directly at the light source of LED at high output, as it may harm your vision.
8. The products are designed to operate without failure in recommended usage conditions. However, please take
the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise.
9. The products are manufactured to be used for ordinary electronic equipment. Please contact our sales staff
beforehand when exceptional quality and reliability are required, and the failure or malfunction of the
products might directly jeopardize life or health ( such as for airplanes, aerospace, transport equipment,
medical applications, nuclear reactor control systems and so on).
10. When there is a process of supersonic wave welding etc. after mounting the product, there is a possibility of
affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). Please
make sure there is no problem before using.
11. The formal specification sheets shall be valid only by exchange of documents signed by both parties.
2016.4.15
Page : 11