SST39VF1601C Datasheet, PDF (2/39 Pages) Silicon Storage Technology, Inc – 16 Mbit (x16) Multi-Purpose Flash Plus

A Microchip Technology Company
16 Mbit Multi-Purpose Flash Plus
SST39VF1601C / SST39VF1602C
Product Description
Data Sheet
The SST39VF1601C and SST39VF1602C devices are 1M x16 CMOS Multi-Purpose Flash Plus
(MPF+) manufactured with SST proprietary, high performance CMOS SuperFlash technology. The
split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability
compared with alternate approaches. The SST39VF160xC writes (Program or Erase) with a 2.7-3.6V
power supply. These devices conform to JEDEC standard pinouts for x16 memories.
Featuring high performance Word-Program, the SST39VF1601C/1602C devices provide a typical
Word-Program time of 7 µsec. These devices use Toggle Bit, Data# Polling, or the RY/BY# pin to indi-
cate the completion of Program operation. To protect against inadvertent write, they have on-chip hard-
ware and Software Data Protection schemes. Designed, manufactured, and tested for a wide spectrum
of applications, these devices are offered with a guaranteed typical endurance of 100,000 cycles. Data
retention is rated at greater than 100 years.
The SST39VF1601C/1602C devices are suited for applications that require convenient and economi-
cal updating of program, configuration, or data memory. For all system applications, they significantly
improve performance and reliability, while lowering power consumption. They inherently use less
energy during Erase and Program than alternative flash technologies. The total energy consumed is a
function of the applied voltage, current, and time of application. Since for any given voltage range, the
SuperFlash technology uses less current to program and has a shorter erase time, the total energy
consumed during any Erase or Program operation is less than alternative flash technologies. These
devices also improve flexibility while lowering the cost for program, data, and configuration storage
applications.
The SuperFlash technology provides fixed Erase and Program times, independent of the number of
Erase/Program cycles that have occurred. Therefore the system software or hardware does not have
to be modified or de-rated as is necessary with alternative flash technologies, whose Erase and Pro-
gram times increase with accumulated Erase/Program cycles.
To meet high density, surface mount requirements, the SST39VF1601C/1602C are offered in 48-lead
TSOP, 48-ball TFBGA, and 48-ball WFBGA packages. See Figures 2, 3, and 4 for pin assignments.
©2011 Silicon Storage Technology, Inc.
2
DS-25018A
05/11