SLC810 Datasheet, PDF (1/7 Pages) Solid State Optronic – Linear Optocoupler

SLC810
Single Channel
Linear Optocoupler
Description
The SLC810 is a highly advanced linear optocoupler
device. The product takes advantage of tightly matched
transistors used for both a Servo Feedback Loop and a
Forward Output Loop. The closely matched transistors
provide a high degree of linearity across a wide range of
input signal variation. With a minimum internal isolation
gap exceeding 0.40mm, the SLC810 offers a high isolation
voltage making it an ideal product for transformer
replacement in many medical, industrial and power supply
isolation circuits.
The SLC810 comes standard in a miniature 8 pin DIP
package.
Applications
 Power Supply Feedback
 Transformer Replacement
 Audio Signal Interface
 Digital Telephone Isolation
 Medical Sensor Isolation
Schematic Diagram
- LED 1
+ LED 2
+V_CC1 3
I₁ 4
SLC810
8 Not Used
7 Not Used
6
+V_CC2
5
I₂
Features
 High Isolation Voltage (4000V_RMS)
 Low Input Power Consumption
 High Servo Linearity Across Temperature
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL / C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..40mA
Transient Input Current ………………….……………..400mA
Reverse Input Control Voltage …………..…………………6V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
SLC810
SLC810-S
SLC810-STR
8 pin DIP, (50/Tube)
8 pin SMD, (50/Tube)
8 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2012 Solid State Optronics • San Jośe, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 7
SLC810/S/TR
Rev 2.00 (07/30/2012)
001508