S29GL512P12TFIV20 Datasheet, PDF (78/81 Pages) SPANSION – 1 Gigabit, 512 Megabit, 256 Megabit and 128 Megabit 3.0 Volt-only Page Mode Flash Memory featuring 90 nm MirrorBit Process Technology

Data Sheet
14. Revision History
Section
Description
Revision A0 (October 29, 2004)
Initial Release.
Revision A1 (October 20, 2005)
Global
Revised all sections of document.
Revision A2 (October 19, 2006)
Global
Revised all sections of document. Reformatted document to new template. Changed speed options
for S29GL01GP.
Revision A3 (November 21, 2006)
AC Characteristics
Revision A4 (December 18, 2006)
Erase and Program Operations table: Changed t_BUSY to a maximum specification.
Global
Changed t_ACC, t_CE specifications on 128 Mb, 256 Mb, and 512 Mb devices. Added 90 and 100 ns
speed options.
Write Buffer Programming, Sector
Erase
Write Buffer Programming Operation, Sector Erase Operation figures: Deleted “Wait 4 ms” box from
flowcharts.
Password Protection Method
Lock Register Program Algorithm figure: Deleted “Wait 4 ms” box from flowchart.
Read-only Operations table
Program and Erase Operations tables
TSOP Pin and BGA Capacitance table
Modified t_RC, t_ACC, t_CE, t_OE specifications.
Changed t_DS specification, deleted write cycle time note.
Changed all specifications in table.
Revision A5 (May 18, 2007)
Global
Changed data sheet status to Preliminary.
Deleted references to requirement for external WP# pull-up.
Performance Characteristics
Max. Read Access Times table: Added note.
Hardware Reset
Deleted note from section.
AC Characteristics
Reset Timings figure: Deleted note.
Command Definitions tables
S29GL-P Sector Protection Command Definitions tables: Changed “Global Non-Volatile Freeze” to
“Global Volatile Freeze”.
DC Characteristics
Page Read Timings figure
CMOS Compatible table: Changed I_CC1 maximum current for 5 MHz and MHz test conditions.
Corrected address range for top waveform.
Revision A6 (October 23, 2007)
Performance Characteristics
Changed speed options for S29GL512P
Ordering Information
Corrected samples OPN valid combinations; changed speed options for S29GL512P
64-Ball Fortified BGA
Clarified ball “D1” connection
56-Pin TSOP
Clarified pin “30” connection
Autoselect
Added recommendation statement
Accelerated Program
Added recommendation statement
Persistent Protection Bits
Removed “Erase” from title and flow chart
Secured Silicon Sector
Sections “Factory Locked Secured Silicon Sector” & “Customer Lockable Secured Silicon Sector”:
clarified shipping options
Power-up Sequence Timing
Advance Information on S29GL-R
65 nm MirrorBit Hardware Reset
(RESET#) and Power-up Sequence
Changed t_RH from “Max” to “Min” value
Added section
Global
Fixed cross-references that were not live hyperlinks.
Revision A7 (November 8, 2007)
Advance Information on S29GL-R 65
nm MirrorBit Hardware Reset (RESET#) Changed timing specs and waveforms
and Power-up Sequence
78
S29GL-P MirrorBit^® Flash Family
S29GL-P_00_A14 October 22, 2012