|
MB9B610T Datasheet, PDF (73/141 Pages) SPANSION – This document states the current technical specifications regarding | |||
|
◁ |
DataSheet
ï® Pin Status in Each CPU State
The terms used for pin status have the following meanings.
ï INITX=0
This is the period when the INITX pin is the "L" level.
ï INITX=1
This is the period when the INITX pin is the "H" level.
ï SPL=0
This is the status that standby pin level setting bit (SPL) in standby mode control register (STB_CTL) is
set to "0".
ï SPL=1
This is the status that standby pin level setting bit (SPL) in standby mode control register (STB_CTL) is
set to "1".
ï Input enabled
Indicates that the input function can be used.
ï Internal input fixed at "0"
This is the status that the input function cannot be used. Internal input is fixed at "L".
ï Hi-Z
Indicates that the output drive transistor is disabled and the pin is put in the Hi-Z state.
ï Setting disabled
Indicates that the setting is disabled.
ï Maintain previous state
Maintains the state that was immediately prior to entering the current mode.
If a built-in peripheral function is operating, the output follows the peripheral function.
If the pin is being used as a port, that output is maintained.
ï Analog input is enabled
Indicates that the analog input is enabled.
ï Trace output
Indicates that the trace function can be used.
70
MB9B610T-DS706-00014-3v0-E, February 10, 2015
|
▷ |