MBM29F160TE70 Datasheet, PDF (24/49 Pages) SPANSION – FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT

MBM29F160TE70/90/MBM29F160BE70/90
s ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Symbol
Unit
Min
Max
Storage Temperature
Tstg
–55
+125
°C
Ambient Temperature with Power Applied
TA
–40
+85
°C
Voltage with Respect to Ground All pins
except A9, OE, RESET *^1, *²
VIN, VOUT
–2.0
+7.0
V
Power Supply Voltage *¹
VCC
–2.0
+7.0
V
A9, OE and RESET *^1, *³
VIN
–2.0
+13.5
V
*1: Voltage is defined on the basis of VSS = GND = 0 V.
*2: Minimum DC voltage on input or l/O pins is –0.5 V. During voltage transitions, input or I/O pins may undershoot
VSS to –2.0 V for periods of up to 20 ns. Maximum DC voltage on input or l/O pins is VCC +0.5 V. During voltage
transitions, input or I/O pins may overshoot to VCC +2.0 V for periods of up to 20 ns.
*3: Minimum DC input voltage on A9, OE and RESET pins is –0.5 V. During voltage transitions, A9, OE and RESET
pins may undershoot VSS to –2.0 V for periods of up to 20 ns. Voltage difference between input and supply voltage
(VIN – VCC) does not exceed +9.0 V. Maximum DC input voltage on A9, OE and RESET pins is +13.5 V which
may overshoot to +14.0 V for periods of up to 20 ns.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Value
Unit
Min
Max
Ambient Temperature
TA
–40
+85
°C
Power Supply Voltage*
VCC
+4.50
+5.50
V
* : Voltage is defined on the basis of VSS = GND = 0 V.
Note: Operating ranges define those limits between which the functionality of the device is guaranteed.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
24