FTM-9812T-C10 Datasheet, PDF (1/12 Pages) Source Photonics, Inc. – GEPON ONU Triplexer

GEPON ONU Triplexer
FTM-9812T-C10(G)
(IEEE 802.3ah™-2004 1000BASE-PX10-U)
Aug. 10, 2007
Members of Flexon^TM Family
Standard
Features
‹ Single fiber bi-directional triple links with
symmetric 1.25Gbps upstream/1.25Gbps
downstream and 47M~870M CATV analog signal.
‹ Burst mode operation transmitter with 1310nm FP
laser.
‹ Continuous mode operation digital receiver with
1490nm high sensitivity PIN-TIA.
‹ 47~870M CATV receiver with 1550nm analog PD.
‹ Suitable for Voice/Data/Video FTTx applications.
‹ 0~70℃ operating temperature.
‹ Compact package with SC/APC pigtail.
‹ Single 3.3V power supply for digital transceiver.
‹ Dual 5V/12V power supply for CATV receiver.
‹ LVPECL compatible data input and data output
interface.
‹ LVTTL transmitter burst -mode control
‹ LVTTL transmitter disable control
‹ LVTTL digital receiver signal-detected indication
‹ CATV receiver input optical power monitor output
‹ Low EMI and excellent ESD protection
‹ Class I laser safety standard IEC-60825 compliant
‹ RoHS compliance (FTM-9812T-C10G)
Applications
‹ Gigabit Ethernet Passive Optical Networks
(GEPON) – ONU side
‹ Compliant with IEEE Std 802.3ah™ -2004
1000BASE-PX10-U and ITU-T G.983.3
‹ Compliant with FCC 47 CFR Part 15, Class B
‹ Compliant with FDA 21 CFR 1040.10 and 1040.11,
Class I
Description
FTM-9812T-C10(G) triplexer is Optical Network Unit
(ONU) for IEEE802.3ah™-2004 1000BASE-PX10
application.
The triplexer is the high performance module for
1.25Gbps data link in single fiber by using 1310nm
burst mode transmitter and 1490nm continuous mode
digital receiver with 1550nm CATV analog receiver.
The transmitter section uses a multiple quantum well
1310nm FP laser ,which is Class Ⅰ laser compliant
product according to international safety standard
IEC-60825. The digital receiver section uses an
integrated 1490nm PIN and preamplifier mounted in an
optical header and limiting post-amplifier IC.The CATV
receiver section uses high performance analog PD and
low noise RF amplifier at 47~870MHz.
The optical burst output can be enabled by a LVTTL
logic high-level input of TX_BRST. Optical output can be
disabled by a LVTTL logic high-level input of TX_DIS.
Signal Detected (SD) output is provided to indicate the
detection of an input optical signal of digital receiver.
CATV receiver input optical power level can be
monitored by analog signal ANALOG_SD.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 12