ICX085AK Datasheet, PDF (10/19 Pages) Sony Corporation – Diagonal 11mm (Type 2/3) Progressive Scan CCD Image Sensor with Square Pixel for Color Cameras

ICX085AK
Image Sensor Characteristics Measurement Method
Measurement conditions
1) In the following measurements, the substrate voltage is set to the value indicated on the device, and the
device drive conditions are at the typical values of the bias and clock voltage conditions.
2) In the following measurements, spot blemishes are excluded and, unless otherwise specified, the optical
black level (OB) is used as the reference for the signal output, which is taken as the value of the Gr/Gb
signal output or the R/B signal output of the measurement system.
Color coding and readout of this image sensor
Gb B Gb B
R Gr R Gr
Gb B Gb B
R Gr R Gr
The primary color filters of this image sensor are arranged in the
layout shown in the figure on the left (Bayer arrangement).
Gr and Gb denote the G signals on the same line as the R signal and
the B signal, respectively.
Horizontal register
Color Coding Diagram
All pixels signals are output successively in a 1/12s period.
The R signal and Gr signal lines and the Gb signal and B signal lines are output successively.
– 10 –