ICX419ALL Datasheet, PDF (1/21 Pages) Sony Corporation – Diagonal 8mm (Type 1/2) CCD Image Sensor for CCIR B/W Video Cameras

ICX419ALL
Diagonal 8mm (Type 1/2) CCD Image Sensor for CCIR B/W Video Cameras
Description
The ICX419ALL is an interline CCD solid-state
image sensor suitable for CCIE B/W video cameras
with a diagonal 8mm (Type 1/2) system. Compared
with the current product ICX039DLA, basic
characteristics such as sensitivity, smear, dynamic
range and S/N are improved drastically.
This chip features a field period readout system and
an electronic shutter with variable charge-storage
time. This chip is compatible with the pins of the
ICX039DLA and has the same drive conditions.
20 pin DIP (Cer-DIP)
Pin 1
2
Features
• High sensitivity (+5.0dB compared with the ICX039DLA)
V
• Low smear (–5.0dB compared with the ICX039DLA)
• High D range (+3.0dB compared with the ICX039DLA)
• High S/N
• High resolution and low dark current
3
Pin 11
12
H
40
• Excellent antiblooming characteristics
Optical black position
• Continuous variable-speed shutter
(Top View)
• Substrate bias: Adjustment free (external adjustment also possible with 6 to 14V)
• Reset gate pulse: 5Vp-p adjustment free (drive also possible with 0 to 9V)
• Horizontal register: 5V drive
Device Structure
• Interline CCD image sensor
• Optical size:
Diagonal 8mm (Type 1/2)
• Number of effective pixels: 752 (H) × 582 (V) approx. 440K pixels
• Total number of pixels: 795 (H) × 596 (V) approx. 470K pixels
• Chip size:
7.40mm (H) × 5.95mm (V)
• Unit cell size:
8.6µm (H) × 8.3µm (V)
• Optical black:
Horizontal (H) direction: Front 3 pixels, rear 40 pixels
Vertical (V) direction: Front 12 pixels, rear 2 pixels
• Number of dummy bits: Horizontal 22
Vertical 1 (even fields only)
• Substrate material:
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E01506B41