ICX282AQ Datasheet, PDF (1/48 Pages) Sony Corporation – Diagonal 11mm (Type 2/3) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras

ICX282AQ
Diagonal 11mm (Type 2/3) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras
Description
The ICX282AQ is a diagonal 11mm (Type 2/3)
interline CCD solid-state image sensor with a square
pixel array and 5.07M effective pixels. Frame readout
allows all pixels' signals to be output independently
within approximately 1/3.75 second. In addition, output
is possible using various addition and pulse elimination
methods. This chip features an electronic shutter with
variable charge-storage time. Adoption of a design
specially suited for frame readout ensures a saturation
signal level equivalent to that when using field readout.
High resolution and high color reproductively are
achieved through the use of R, G, B primary color
mosaic filters as the color filters. Further, high
sensitivity and low dark current are achieved through
the adoption of Super HAD CCD technology.
This chip is suitable for applications such as
electronic still cameras, PC input cameras, etc.
24 pin DIP (Plastic)
Features
• High horizontal and vertical resolution
• Supports 10 types of readout modes
Frame readout mode, 2× speed mode (1), 2× speed mode (2), 8× speed mode,
center scan mode (1), center scan mode (2), center scan mode (3),
center scan mode (4), AF mode (1), AF mode (2)
• Square pixel
• Horizontal drive frequency: 22.5MHz
• No voltage adjustments (reset gate and substrate bias are not adjusted.)
• R, G, B primary color mosaic filters on chip
• High sensitivity, low dark current, excellent anti-blooming characteristics
• Continuous variable-speed shutter
• Horizontal register, reset gate: 3.3V drive
• 24-pin high-precision plastic package
V
Pin 1
2
Device Structure
• Interline CCD image sensor
• Image size:
Diagonal 11mm (Type 2/3)
• Total number of pixels: 2658 (H) × 1970 (V) approx. 5.24M pixels
12
Pin 13
H
8
58
• Number of effective pixels: 2588 (H) × 1960 (V) approx. 5.07M pixels
• Number of active pixels: 2580 (H) × 1944 (V) approx. 5.02M pixels
• Number of recommended recording pixels:
2560 (H) × 1920 (V) approx. 4.92M pixels
Optical black position
(Top View)
• Chip size:
9.74mm (H) × 7.96mm (V)
• Unit cell size:
3.4µm (H) × 3.4µm (V)
• Optical black:
Horizontal (H) direction: Front 12 pixels, rear 58 pixels
Vertical (V) direction: Front 8 pixels, rear 2 pixels
• Number of dummy bits: Horizontal 28
Vertical 1 (even fields only)
• Substrate material:
Silicon
∗ _{Super HAD CCD is a registered trademark of Sony Corporation. Super HAD CCD is a CCD that drastically improves sensitivity by introducing}
newly developed semiconductor technology by Sony Corporation into Sony's high-performance HAD (Hole-Accumulation Diode) sensor.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E00Z37A1Z-PS