English
Language : 

ICX080AK Datasheet, PDF (1/19 Pages) Sony Corporation – Diagonal 6mm (Type 1/3) CCD Image Sensor for NTSC Color Video Cameras
ICX080AK
Diagonal 6mm (Type 1/3) CCD Image Sensor for NTSC Color Video Cameras
Description
The ICX080AK is an interline CCD solid-state
image sensor suitable for NTSC color video
cameras. This chip conforms to DV standard SD
mode, and has the optimal number of pixels for
MPEG2 Main level. While achieving a horizontal
resolution of 450 TV lines, the area has been
expanded 33% in both vertical and horizontal
directions, making the chip suitable for electronic
vibration stabilizer and electronic panning/tilting. In
addition, complete 16:9 wide aspect ratio images
are provided with a high picture quality without
requiring vertical interpolation.
High sensitivity and low dark current are achieved
through the adoption of Ye, Cy, Mg and G
complementary color mosaic filters and HAD (Hole-
Accumulation Diode) sensors.
This chip features a field period readout system
and an electronic shutter with variable charge-
storage time.
The package is a 16-pin DIP (Plastic), and both
top and bottom surface reference can be assured at
the same time.
16 pin DIP (Plastic)
V
4
Pin 9
Pin 1
8
12
H
50
Features
• Supports electronic vibration stabilizer and electronic panning/tilting
(33%/one side)
Optical black position
(Top View)
• Supports electronic zoom
• Supports DV standard SD mode and MPEG2 Main level (13.5MHz)
• Supports 16:9 wide aspect ratio (for both 18MHz and 5fsc)
• Supply voltage: 12V
• Horizontal register and reset gate: 2.7 to 3.6V drive
• No voltage adjustment (Reset gate and substrate bias are not adjusted.)
• High resolution, high sensitivity, low dark current and low smear
• Excellent antiblooming characteristics
• Continuous variable-speed shutter (1/60 to 1/10000s)
• Supports short exit pupil distance (Recommended range: –20 to –100mm)
• Ye, Cy, Mg and G complementary color mosaic filters on chip
• 16-pin high precision plastic package (both top and bottom surface reference possible)
Device Structure
• Interline CCD image sensor
• Image size:
• Total number of pixels:
• Total number of effective pixels:
• Number of effective pixels: 4:3 NTSC:
16:9 18MHz:
16:9 5fsc:
• Chip size:
• Unit cell size:
• Optical black:
• Number of dummy bits:
• Substrate material:
Diagonal 6mm (Type 1/3)
1016 (H) x 674 (V) approx. 680K pixels
962 (H) x 654 (V) approx. 630K pixels
711 (H) x 485 (V) approx. 340K pixels
948 (H) x 485 (V) approx. 460K pixels
942 (H) x 485 (V) approx. 460K pixels
5.90mm (H) x 4.92mm (V)
5.05µm (H) x 5.55µm (V)
Horizontal (H) direction: Front 4 pixels, rear 50 pixels
Vertical (V) direction: Front 12 pixels, rear 8 pixels
Horizontal 28
Vertical 1 (even fields only)
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E95518D99