LAN9215I_07 Datasheet, PDF (134/138 Pages) SMSC Corporation – Highly Efficient Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX and Industrial Temperature Support

Highly Efficient Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX and Industrial Temperature Support
Datasheet
7.5
DC Electrical Specifications
Table 7.3 below lists the worst case current consumption for each of the supplies of the LAN9215i.
These figures are provided to assist system designers properly design the power supply; they cannot
be used to determine typical power consumption of the device. All of these values are preliminary.
Note: The current measurements listed below were taken under the following conditions:
Temperature: .....................................................................................................................-40°C to +85°C
Device VDD:....................................................................................................................+3.30 V +/- 10%
Table 7.3 Supply Current Characteristics
PARAMETER
SUPPLY
NAME
MIN TYP
MAX
UNITS
NOTES
Internal Regulator Supply
Current
+3.3V I/O Supply Current
+3.3V Analog Supply
Current
Reference Supply Current
VREG
VDD_IO
VDD_A
VDD_REF
69
mA
13
mA
40
mA
31
mA
Note 7.7
Above figures do not include the supply current for the magnetics. Based on the
recommended implementation, the maximum supply current needed for the magnetics is
108mA.
Table 7.4 I/O Buffer Characteristics
PARAMETER
SYMBOL
MIN
I Type Input Buffer
Low Input Level
High Input Level
IS Type Input Buffer
Negative-Going Threshold
Positive-Going Threshold
Schmitt Trigger Hysteresis
(V_{IHT -} V_ILT)
O12 Type Buffer
Low Output Level
High Output Level
OD12 Type Buffer
Low Output Level
V_ILI
V_IHI
V_ILT
V_IHT
V_HYS
V_OL
V_OH
V_OL
-0.3
2.0
1.01
1.39
345
VDD - 0.4
TYP
1.18
1.6
420
MAX
0.8
5.5
1.35
1.8
485
0.4
0.4
UNITS
NOTES
V
V
V
Schmitt Trigger
V
Schmitt Trigger
mV
V
I_OL = 12mA
V
I_OH = -12mA
V
I_OL = 12mA
Revision 1.93 (12-12-07)
134
DATASHEET
SMSC LAN9215i