|
CAP1014 Datasheet, PDF (1/84 Pages) SMSC Corporation – Multiple Channel Capacitive Touch Sensor and LED Driver | |||
|
CAP1014
Multiple Channel Capacitive
Touch Sensor and LED Driver
PRODUCT FEATURES
Datasheet
General Description
The CAP1014 is a multiple channel Capacitive Touch
sensor and LED Driver.
The CAP1014 contains up to fourteen (14) individual
Capacitive Touch sensor inputs with programmable
sensitivity for use in touch button and slider switch
applications. Each sensor also contains automatic
recalibration with programmable time delays.
The CAP1014 also contains eleven (11) low side LED
drivers that offer full-on / off, variable rate blinking,
dimness controls, and breathing. Capacitive buttons can
be linked to LED outputs.
Applications
 Consumer Electronics
 Desktop and Notebook PCâs
 LCD Monitors
Features
 Fourteen (14) Capacitive Touch Sensor inputs
â Programmable sensitivity
â High SNR allows for easy tuning
â Automatic recalibration
â Slider Acceleration Detection
â Slider positional detection
 Low Power operation
â 150uA quiescent current in Deep Sleep
â 250uA quiescent current in Sleep mode while
monitoring 2 buttons.
 Alert to signal touch to host processor
 User controlled reset
 Low External Component Count
 SMBus 2.0 compliant interface to change operating
parameters to work in a wide variety of systems
â Block Read and Write function for quick tasking
 Eleven (11) LED Driver outputs
â Programmable blink, breathe, and dimness controls
â 8 Configurable as GPIOs
â Buttons can be linked to LED responses
 Development boards and software available
 Available in 32-pin 5mm x 5mm QFN Lead-free
RoHS Compliant package
Block Diagram
LED2
LED4
LED6
LED8 LED10
LED1
LED3
LED5
LED7
LED9 LED11
RESET
VDD GND
LED Blink, Breathe, and Dimness control
Capacitive Sensing Algorithm
SMBus
Slave
Protocol
SMCLK
SMDATA
ALERT
CS1
CS3
CS5
CS7
CS9
CS11
CS13
CS2
CS4
CS6
CS8
CS10
CS12
CS14
SMSC CAP1014
DATASHEET
Revision 1.65 (08-11-09)
|
▷ |