ME40_16 Datasheet, PDF (2/4 Pages) SL Power Electronics – 40W Single Output External Power

ME40
40W Single Output External Power
Medical Series
General Specifications
AC Input 100-240Vac, ±10%, 47-63Hz, 1∅
Turn On Time Less than 700mS @115Vac, full load
Input Current 115Vac: 1.2A, 230Vac: 01.6A
Hold-up Time 20mS min., at full Load, 100Vac input
Inrush Current 264Vac, cold start: will not exceed 40A
Overtemperature Will shutdown upon an over-temperature
Protection condition, auto-recovery.
Input Fuses
F1, F2: 2.0A, 250Vac fuses (line & neutral
lines) provided on all models
Overload Protection 130 to 180% of rating, Hiccup Mode
Earth Leakage Input-GND: <500μA@264Vac, 60Hz, NC
Current Output-GND: <4mA@264Vac, 60Hz, NC
Short Circuit
Protection
Hiccup Mode, auto recovery.
Efficiency >87%, typical
Output Power
40W continuous – See models chart for
specific voltage model ratings.
No Load Input <0.1W per DoE Efficiency Level VI
Power Requirements
Overvoltage Hiccup mode. See models chart for trip
Protection ranges.
Input-Output: 2 MOPP
Isolation Input-Ground: 1 MOPP
Output-Ground: 1 MOPP
Safety Standards EN/IEC/UL60601-1, 3rd edition and
Ripple and Noise See models chart on pg 1.
Operating
Temperature
-20°C to +70°C
Output Voltage See models chart on pg 1.
Transient
Response
500µs response time for return to within 0.5%
of final value for any 50% load step over the
range of 5% to 100% of rated load, ∆i/∆t<
0.2A/µs. Max. voltage deviation is +/-3.5%.
Regulation See models chart on pg 1.
Temperature
Derating
See derating chart
Storage Temperature -40°C to +85°C
Altitude
Operating: to 5000m.
Non-operating: -500 to 40,000 ft.
Drop Test
1.4m from table top to wooden platform, 6
faces.
Vibration
Operating: 0.003g/Hz, 1.5grms overall, 3
axes, 10 min/axis, 1-500Hz.
Non-Oper.: random waveform, 3 minutes per
axis, 3 axes and Sine waveform, Vib.
frequency/acceleration: 10-500Hz/1g, sweep
rate of 1 octave / minutes, Vibration time of 10
sweeps / axes, 3 axes
Dimensions See outline drawings
Weight 250g
All specifications are typical at nominal input, full load, at 25°C ambient unless noted.
Relative Humidity 5% to 95%, non-condensing
Shock
Operating: Half-sine, 20gpk, 10mS, 3 axes,
6 shocks total
Non-Operating: Half-sine waveform, impact
acceleration of 100G, Pulse duration of 6
mS, Number of shocks: 3 for each of the
three axis
MTBF
E-Cap Life
>1,000,000 hours, full load, 110 & 220Vac
input, 25°C amb., per Telcordia 332 Issue 6.
>8 year life based on calculations at
115Vac/60Hz & 230Vac/50Hz, ambient 25°C
at 24 hrs per day, 365 days/year, 6 power up
cycles per day.
www.slpower.com
ME40 Rev 2.3 30-SEP-16
2