ME40_16 Datasheet, PDF (1/4 Pages) SL Power Electronics – 40W Single Output External Power

ME40
40W Single Output External Power
Medical Series
Features
 _{Meets UL/EN/IEC60601-1-2, 4th edition for EMC}^*
 Approved to EN/IEC/UL60601-1, 3rd edition
 2 MOPP Input to Output Isolation
 Meets DoE Efficiency Level VI Requirements
 No load input power
 Average Efficiency
 Up to 40W of AC-DC Power
 Universal Input 90-264Vac Input Range
 Desktop and Wall-Plug versions
 Meets EN55011/CISPR11, FCC Part 15.109 Class B
Conducted & Radiated Emissions, with 6db margin
 IP22 Rated Enclosure
 E-cap life of >8 years
 >1,000,000 hours MTBF
 3 Year Warranty
Description
A high performance AC to DC external power supply family designed for medical applications. The ME40A Medical Series
low power external AC-DC power supplies are approved to safety EN/IEC/UL60601-1, 3rd edition with isolation levels
which satisfy the 2 MOPP requirements and designed to UL/EN/IEC60601-1-2, 4th edition for EMC^*. The ME40A Series
models will operate at universal input range of 90 to 264Vac over the wide temperature range of -20°C to +70°C,
delivering full rated output power up to +40°C and applicable output power derating at 70°C. These models are available
in desktop and wall-plug versions, include an IP22 rating per IEC60529 for the enclosure, and output cable terminated at
a variety of output connectors.
*Consult Factory for Table 9 compliance information.
Model Selection
Model
Number
Volts
Output
Current
Output
Power
Ripple &
Noise¹
Line
Regulation
Load
Regulation
Overvoltage
Trip Range
Output
Connector
Input
Configuration
ME40A0503F01 5.0V
5.00A
25W
100mV pk-pk
±1%
ME40A1203F01 12.0V 3.40A
40W
120mV pk-pk
±1%
ME40A1803F01 18.0V 2.22A
40W
180mV pk-pk
±1%
±5%
±5%
±5%
120%-150%
120%-150%
120%-150%
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class I Desktop,
IEC60320 C14
Receptacle
ME40A2403F01 24.0V 1.70A
40W
240mV pk-pk
±1%
±5%
120%-140%
ME40A0503N01 5.0V
5.00A
25W
100mV pk-pk
±1%
ME40A1203N01 12.0V 3.40A
40W
120mV pk-pk
±1%
ME40A1803N01 18.0V 2.22A
40W
180mV pk-pk
±1%
±5%
±5%
±5%
120%-150%
120%-150%
120%-150%
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Desktop,
IEC60320 C8
Receptacle
ME40A2403N01 24.0V 1.70A
40W
240mV pk-pk
±1%
±5%
120%-140%
ME40A0503Q01 5.0V
5.00A
25W
100mV pk-pk
±1%
ME40A1203Q01 12.0V 3.40A
40W
120mV pk-pk
±1%
ME40A1803Q01 18.0V 2.22A
40W
180mV pk-pk
±1%
ME40A2403Q01 24.0V 1.70A
40W
240mV pk-pk
±1%
±5%
±5%
±5%
±5%
120%-150%
120%-150%
120%-150%
120%-140%
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Desktop,
IEC60320 C18
Receptacle
ME40A0503B01 5.0V
5.00A
25W
100mV pk-pk
±1%
ME40A1203B01 12.0V 3.40A
40W
120mV pk-pk
±1%
ME40A1803B01 18.0V 2.22A
40W
180mV pk-pk
±1%
ME40A2403B01 24.0V 1.70A
40W
240mV pk-pk
±1%
±5%
±5%
±5%
±5%
120%-150%
120%-150%
120%-150%
120%-140%
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Wall-Plug,
Interchangeable
Blades²
ME40A0503C01 5.0V
5.00A
25W
100mV pk-pk
±1%
ME40A1203C01 12.0V 3.40A
40W
120mV pk-pk
±1%
ME40A1803C01 18.0V 2.22A
40W
180mV pk-pk
±1%
±5%
±5%
±5%
120%-150%
120%-150%
120%-150%
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Wall-Plug,
Fixed North
American Blades³
ME40A2403C01 24.0V 1.70A
40W
240mV pk-pk
±1%
±5%
120%-140%
Notes: 1. Measured at the output connector, with noise probe directly across output and load terminated with 0.1μF ceramic and 10μF low ESR capacitors.
2. Standard models are fitted with North American blades. Order blade kit KT-1027K for other blades (EU. UK, Australia)
3. For EU fixed blades, replace “C” in the model number with “M”, for UK blades, replace “C” with “G”, for Australia blades, replace “C” with “H”.
4. All specifications are typical at nominal input, full load, at 25°C ambient unless noted.
5. For Input Class I models: For AC GND connected to output common (-), insert a “B” in the part number where the “A” is located (TE40B1203F01).
www.slpower.com
ME40 Rev 2.3 30-SEP-16
1