GPHP600 Datasheet, PDF (2/3 Pages) SL Power Electronics – High Power Supplies 600/700 Watt AC/DC Universal Input Power Supply

GENERAL SPECIFICATIONS
Hold-up time
120 Vac, 60 Hz
Efficiency
120 Vac 600 W output
isolation voltage
input to ouput
input to ground
Switching frequency
fixed
Safety Approvals
Maximum weight
30 ms at 600 Watts output
>84 %
4000 Vac
1500 Vac
70 KHz, +/- 10 KHz
UL/EN/IEC 60950-1 1st Edition CSA22.2 No.60950-1-03
2 kg (4.4 lbs)
MODEL NUMBER Output
GPHP600-24
24 V 25 A
GPHP600-28
28 V 21.5 A
GPHP600-36
36 V 17 A
GPHP700-48
48 V 14 A
Peak Output
24 V 27 A
28 V 23.5 A
36 V 19 A
48 V 15.6 A
Features
Hot Swap
Hot Swap
Hot Swap
Hot Swap
Ripple
240 mV
240 mV
240 mV
240 mV
Regulation
3% (see note 4)
3% (see note 4)
3% (see note 4)
3% (see note 4)
NOTES
1. Integral forced air cooling
2. Peak rating is for 1 minute maximum 10% duty cycle
3. Noise measurent 20 MHz Bandwidth, differential mode. Measured with scope probe directly across output terminals of the power supply.
4. Regulation includes provision for ‘droop’ sharing
MECHANICAL NOTES
The GPHP series is factory configured for rack mounting installation with Condor CRA series racks. Other mounting configurations and connector op-
tions are available, Please contact factory.
POWER CONNECTOR DIN # 41612 Type H
INPUT PINS
Z-32
AC Line
D-30
AC Neutral
Z-28, D26
GROUND
OUTPUT PINS
Z12, D14, Z16,D18
OUTPUT
Z4, D6, Z8, D10
RETURN (COMMON)
STATUS & CONTROL PINS
Z20
DC POWER GOOD
Z24
INHIBIT
D22
AC POWER FAIL
Page 2 of 3